Clube BMW Portugal

boa tarde amigos..
ando no dilema de querer criar uma chave nova sem ir a bmw deixar 180 €

comprei o corpo , laminei a chave.. ate aqui.. okk...

peguei numa chave de um e39 e mudei eletronica e o chip dessa chave...

agora tentei programar a chave seguindo o que dizem nos forums americanos ..

Remote Key Re-Initialise - If a key fails to operate remotely, it will have to be re-initialised (all keys in sequence at the same time)

1. Get in and close all doors
2. Turn the ignition on & off quickly (no more than 5 seconds) to start the process. Next action must take place within 30 seconds
3. First key - hold down button #2 (unlock - on the bottom left with the key blade pointing up) while striking button #1 (lock - the BMW logo) three times. Release button #2. This should be confirmed by door lock operation.
4. If you have more than 1 key then you need to repeat for the other keys within 30 seconds of first or they will be rendered inactive.
5. After last key then cycle the ignition on/off to finalise the process (it is not necessary to start the engine).

Both keys should now have new randomly selected security code words - assigned by the car's system.
Those codes will be continuously incremented within the new sequence each time you hit a button. It is when they get out of sequence with the car that they loose the capability to be recognised and you then have to do this again.

This occurs when you take longer than 1 minute changing the battery, or if you hit the buttons more than 1000 times when it is out of range of the car.


depois disto nada feitoo.. a chave nova nao deu..


alguem tem alguma dica????

Penso que tenhas de codificar a chave com o programa, esses passos servem para emparelhar as chaves com o carro!
Penso que seja assim!

Emparelhar só a parte de comandos de abrir as portas. Eh?

djangopt Escreveu:boa tarde amigos..
ando no dilema de querer criar uma chave nova sem ir a bmw deixar 180 €

comprei o corpo , laminei a chave.. ate aqui.. okk...

peguei numa chave de um e39 e mudei eletronica e o chip dessa chave...

agora tentei programar a chave seguindo o que dizem nos forums americanos ..

Remote Key Re-Initialise - If a key fails to operate remotely, it will have to be re-initialised (all keys in sequence at the same time)

1. Get in and close all doors
2. Turn the ignition on & off quickly (no more than 5 seconds) to start the process. Next action must take place within 30 seconds
3. First key - hold down button #2 (unlock - on the bottom left with the key blade pointing up) while striking button #1 (lock - the BMW logo) three times. Release button #2. This should be confirmed by door lock operation.
4. If you have more than 1 key then you need to repeat for the other keys within 30 seconds of first or they will be rendered inactive.
5. After last key then cycle the ignition on/off to finalise the process (it is not necessary to start the engine).

Both keys should now have new randomly selected security code words - assigned by the car's system.
Those codes will be continuously incremented within the new sequence each time you hit a button. It is when they get out of sequence with the car that they loose the capability to be recognised and you then have to do this again.

This occurs when you take longer than 1 minute changing the battery, or if you hit the buttons more than 1000 times when it is out of range of the car.


depois disto nada feitoo.. a chave nova nao deu..


alguem tem alguma dica????

E a frequencia da chave é a mesma??

fiquei com os comandos de abrir as portas mas ligar o carro nao consegui..

Imobilizador?

Que tem o imobilizador?

Sim

Eu também preciso de uma segunda chave para a minha E39. A todo o lado onde fui, sempre me disseram que não conseguiriam colocar uma chave a funcionar com o meu carro, a não ser fazendo uma nova. Isto, porque pensei em comprar uma usada no Ebay, e depois colocá-la a funcionar com o meu carro... Mas então é possivel fazer isto????

Este tópico está duplicado, o que provoca confusão...

Já não está

mass eu pus o chip na chave nova que mandei fazer e nao esta a dar.

boas, eu consigo programar o immobilizador, se arranjarem uma chave usada e fizerem a lamina, depois programo

cumps

nicee.. era isso que precisava