Página 1 de 1

Problema de leitura no BMW High 2013 DVD DL

Enviado: 22 nov 2012, 14:36
por Mr_x
Boas.

Testei hoje os novos mapas para o meu MKIV, experimentei gravar a versão com speedcams em DVD DL.
No entanto e alem de ter seguidos todos os passos indicados, tem alturas que o DVD não é logo reconhecido, ou então demora muito para poder introduzir moradas e assim.
Visto nunca ter conseguido ler um DVD DL no meu sistema, penso que o problema pode ser do firmware (tenho o "4-1/00 http://www.autonavi.l")

Os dados ao gravar o DVD foram:

Código: Selecionar todos

Antes de gravar:
HL-DT-ST DVDRAM GT20N CQ01 (USB)
Current Profile: DVD + R DL

Disc Information:
Status: Empty
State of Last Session: Empty
Erasable: No
Free Sectors: 4,173,824
Free Space: 8,547,991,552 bytes
Free Time: 927:32:74 (MM: SS: FF)
Next Writable Address: 0
MID: MKM-003-00
Write Supported Speeds: 2.4x; 4x, 6x

DVD ± R DL Boundary Information:
L0 Data Zone Capacity: 2,086,912
Changeable: Yes

Physical Format Information (ADIP - L0):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (ADIP - L1):
Disc ID: MKM-003-00
Book Type: DVD + R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (Last Recorded - L0):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (Last Recorded - L1):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Performance (Write Speed):
Descriptor 1 ...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 4568 KB / s (3.3 x) - WS: 3324 KB / s (2.4 x)
Descriptor 2 ...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 4568 KB / s (3.3 x) - WS: 5540 KB / sec (4x)
Descriptor 3 ...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 4568 KB / s (3.3 x) - WS: 8310 KB / s (6x)


Depois de gravar:
HL-DT-ST DVDRAM GT20N CQ01 (USB)
Current Profile: DVD + R DL

Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: No
Sessions: 1
Sectors: 4,036,848
Size: 8,267,464,704 bytes
Time: 897:06:48 (MM: SS: FF)
Read Supported Speeds: 2.4x; 4x, 6x, 8x
Read Current Speed: 3.3 x - 8x; 8x - x 3.3

File System Information:
Sectors: 4,036,836
Size: 8,267,440,128 bytes
Time: 897:06:36 (MM: SS: FF)

TOC Information:
Session 1 ... (LBA: 0)
-> Track 01 (Mode 1, LBA: 0-4036847)
-> LEADOUT (LBA: 4036848)

Track Information:
Session 1 ...
-> Track 01 (LTSA: 0, LTS: 4036848, LRA: 0)

Disc Control Blocks Information:
HL-DT-ST

Physical Format Information (ADIP - L0):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,591
Last Physical Sector in Layer 0: 2,215,039

Physical Format Information (ADIP - L1):
Disc ID: MKM-003-00
Book Type: DVD + R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (Last Recorded - L0):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,591
Last Physical Sector in Layer 0: 2,215,039

Physical Format Information (Last Recorded - L1):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,591
Last Physical Sector in Layer 0: 2,215,039

Layer Information:
Layer 0 Sectors: 2,018,432 (50%)
Layer 1 Sectors: 2,018,416 (50%)
Alguém me pode ajudar por favor ?

Re: Problema de leitura no BMW High 2013 DVD DL

Enviado: 22 nov 2012, 14:55
por jmcdpereira
Por acaso nos ultimos dois anos consegui gravar à primeira. Mas no outro ano gastei alguns 3 ou 4 DVD´s.
Usa Verbatim -R (acho que é o aconselhando) ou tenta noutro computador sempre à velocidade mais baixa.
Usa o imageburn para gravar.

jmcdpereira

Re: Problema de leitura no BMW High 2013 DVD DL

Enviado: 22 nov 2012, 17:19
por Mr_x
jmcdpereira Escreveu:Por acaso nos ultimos dois anos consegui gravar à primeira. Mas no outro ano gastei alguns 3 ou 4 DVD´s.
Usa Verbatim -R (acho que é o aconselhando) ou tenta noutro computador sempre à velocidade mais baixa.
Usa o imageburn para gravar.

jmcdpereira
Boas.

Eu usei Verbatim, com um gravador externo da LG.
Alem disso foi no ImgBurn, com a velocidade de 2,4.
Será que não é da minha edição do firmware ?
Será possivel instalar outra edição do firmware ???
Help :|

Re: Problema de leitura no BMW High 2013 DVD DL

Enviado: 23 nov 2012, 20:01
por JOFIMO
Mr_x Escreveu:Boas.

Testei hoje os novos mapas para o meu MKIV, experimentei gravar a versão com speedcams em DVD DL.
No entanto e alem de ter seguidos todos os passos indicados, tem alturas que o DVD não é logo reconhecido, ou então demora muito para poder introduzir moradas e assim.
Visto nunca ter conseguido ler um DVD DL no meu sistema, penso que o problema pode ser do firmware (tenho o "4-1/00 http://www.autonavi.l")

Os dados ao gravar o DVD foram:

Código: Selecionar todos

Antes de gravar:
HL-DT-ST DVDRAM GT20N CQ01 (USB)
Current Profile: DVD + R DL

Disc Information:
Status: Empty
State of Last Session: Empty
Erasable: No
Free Sectors: 4,173,824
Free Space: 8,547,991,552 bytes
Free Time: 927:32:74 (MM: SS: FF)
Next Writable Address: 0
MID: MKM-003-00
Write Supported Speeds: 2.4x; 4x, 6x

DVD ± R DL Boundary Information:
L0 Data Zone Capacity: 2,086,912
Changeable: Yes

Physical Format Information (ADIP - L0):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (ADIP - L1):
Disc ID: MKM-003-00
Book Type: DVD + R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (Last Recorded - L0):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (Last Recorded - L1):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Performance (Write Speed):
Descriptor 1 ...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 4568 KB / s (3.3 x) - WS: 3324 KB / s (2.4 x)
Descriptor 2 ...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 4568 KB / s (3.3 x) - WS: 5540 KB / sec (4x)
Descriptor 3 ...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 4568 KB / s (3.3 x) - WS: 8310 KB / s (6x)


Depois de gravar:
HL-DT-ST DVDRAM GT20N CQ01 (USB)
Current Profile: DVD + R DL

Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: No
Sessions: 1
Sectors: 4,036,848
Size: 8,267,464,704 bytes
Time: 897:06:48 (MM: SS: FF)
Read Supported Speeds: 2.4x; 4x, 6x, 8x
Read Current Speed: 3.3 x - 8x; 8x - x 3.3

File System Information:
Sectors: 4,036,836
Size: 8,267,440,128 bytes
Time: 897:06:36 (MM: SS: FF)

TOC Information:
Session 1 ... (LBA: 0)
-> Track 01 (Mode 1, LBA: 0-4036847)
-> LEADOUT (LBA: 4036848)

Track Information:
Session 1 ...
-> Track 01 (LTSA: 0, LTS: 4036848, LRA: 0)

Disc Control Blocks Information:
HL-DT-ST

Physical Format Information (ADIP - L0):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,591
Last Physical Sector in Layer 0: 2,215,039

Physical Format Information (ADIP - L1):
Disc ID: MKM-003-00
Book Type: DVD + R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (Last Recorded - L0):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,591
Last Physical Sector in Layer 0: 2,215,039

Physical Format Information (Last Recorded - L1):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,591
Last Physical Sector in Layer 0: 2,215,039

Layer Information:
Layer 0 Sectors: 2,018,432 (50%)
Layer 1 Sectors: 2,018,416 (50%)
Alguém me pode ajudar por favor ?
Boas não sou expert na matéria mas penso que os MKIV não funcionam ainda com DVD DL ? a ultima versão de firmware para MKIV é a V 32- 4-1/00, lê isto do master JPimpao viewtopic.php?f=96&t=31742

Re: Problema de leitura no BMW High 2013 DVD DL

Enviado: 23 nov 2012, 21:30
por Mr_x
JOFIMO Escreveu:
Mr_x Escreveu:Boas.

Testei hoje os novos mapas para o meu MKIV, experimentei gravar a versão com speedcams em DVD DL.
No entanto e alem de ter seguidos todos os passos indicados, tem alturas que o DVD não é logo reconhecido, ou então demora muito para poder introduzir moradas e assim.
Visto nunca ter conseguido ler um DVD DL no meu sistema, penso que o problema pode ser do firmware (tenho o "4-1/00 http://www.autonavi.l")

Os dados ao gravar o DVD foram:

Código: Selecionar todos

Antes de gravar:
HL-DT-ST DVDRAM GT20N CQ01 (USB)
Current Profile: DVD + R DL

Disc Information:
Status: Empty
State of Last Session: Empty
Erasable: No
Free Sectors: 4,173,824
Free Space: 8,547,991,552 bytes
Free Time: 927:32:74 (MM: SS: FF)
Next Writable Address: 0
MID: MKM-003-00
Write Supported Speeds: 2.4x; 4x, 6x

DVD ± R DL Boundary Information:
L0 Data Zone Capacity: 2,086,912
Changeable: Yes

Physical Format Information (ADIP - L0):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (ADIP - L1):
Disc ID: MKM-003-00
Book Type: DVD + R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (Last Recorded - L0):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (Last Recorded - L1):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Performance (Write Speed):
Descriptor 1 ...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 4568 KB / s (3.3 x) - WS: 3324 KB / s (2.4 x)
Descriptor 2 ...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 4568 KB / s (3.3 x) - WS: 5540 KB / sec (4x)
Descriptor 3 ...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 4568 KB / s (3.3 x) - WS: 8310 KB / s (6x)


Depois de gravar:
HL-DT-ST DVDRAM GT20N CQ01 (USB)
Current Profile: DVD + R DL

Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: No
Sessions: 1
Sectors: 4,036,848
Size: 8,267,464,704 bytes
Time: 897:06:48 (MM: SS: FF)
Read Supported Speeds: 2.4x; 4x, 6x, 8x
Read Current Speed: 3.3 x - 8x; 8x - x 3.3

File System Information:
Sectors: 4,036,836
Size: 8,267,440,128 bytes
Time: 897:06:36 (MM: SS: FF)

TOC Information:
Session 1 ... (LBA: 0)
-> Track 01 (Mode 1, LBA: 0-4036847)
-> LEADOUT (LBA: 4036848)

Track Information:
Session 1 ...
-> Track 01 (LTSA: 0, LTS: 4036848, LRA: 0)

Disc Control Blocks Information:
HL-DT-ST

Physical Format Information (ADIP - L0):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,591
Last Physical Sector in Layer 0: 2,215,039

Physical Format Information (ADIP - L1):
Disc ID: MKM-003-00
Book Type: DVD + R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (Last Recorded - L0):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,591
Last Physical Sector in Layer 0: 2,215,039

Physical Format Information (Last Recorded - L1):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0293 a / bit
Track Density: 0.74 a / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,591
Last Physical Sector in Layer 0: 2,215,039

Layer Information:
Layer 0 Sectors: 2,018,432 (50%)
Layer 1 Sectors: 2,018,416 (50%)
Alguém me pode ajudar por favor ?
Boas não sou expert na matéria mas penso que os MKIV não funcionam ainda com DVD DL ? a ultima versão de firmware para MKIV é a V 32- 4-1/00, lê isto do master JPimpao viewtopic.php?f=96&t=31742

O MKIV le sim DVD DL tendo a ultima versão de firmware (exactamente a que tu indicaste), no entanto no meu caso isto não está a acontecer como deve ser.
Ou seja quando consigo ler o DVD, é uma leitura de dados muitos lenta, e com bloqueios.
No GPS Underground, já me disseram que pode ser derivado á própria drive de leitura, ao que parece algumas drives deixam de ler DVD DL, ficando assim mais restringidas aos DVD SL.
No entanto gostava de testar outra edição do firmware V 32- 4-1/00, alguém sabe onde eu posso encontrar isso, sem ser a edição que eu tenho ??
No caso de continuar a não dar, vou tentar editar eu próprio a versão DL para SL, claro que primeiro tenho que aprender a fazer isso. LOOL«

Re: Problema de leitura no BMW High 2013 DVD DL

Enviado: 01 dez 2012, 23:03
por carlosantos
Boa noite Forum,

Onde poderei obter o BMW High 2013 DVD?

Atenciosamente
Carlosantos

Re: Problema de leitura no BMW High 2013 DVD DL

Enviado: 02 dez 2012, 11:56
por Mr_x
carlosantos Escreveu:Boa noite Forum,

Onde poderei obter o BMW High 2013 DVD?

Atenciosamente
Carlosantos
Boas.
Podes tentar aqui: http://gpsunderground.com/forum/bmw/191 ... 013-a.html

Re: Problema de leitura no BMW High 2013 DVD DL

Enviado: 01 fev 2013, 13:21
por Kasmafan
Boas, o entendido nesta matéria é o Pimpão, mas pondo de parte o problema de gravação dos dvd's o problema estará certamente no laser do teu leitor. Penso que o Pimpão já trocou uns quantos ;)

Re: Problema de leitura no BMW High 2013 DVD DL

Enviado: 01 fev 2013, 17:59
por Mr_x
Kasmafan Escreveu:Boas, o entendido nesta matéria é o Pimpão, mas pondo de parte o problema de gravação dos dvd's o problema estará certamente no laser do teu leitor. Penso que o Pimpão já trocou uns quantos ;)

Boas.
Acabei por optar por uma versão SL...
Ouvi dizer que pro ano, já deve sair a edição em dois DVD-SL e não um DVD-DL.
Para agora desenrasquei....

Re: Problema de leitura no BMW High 2013 DVD DL

Enviado: 01 fev 2013, 19:29
por JPimpao01
Kasmafan Escreveu:Boas, o entendido nesta matéria é o Pimpão, mas pondo de parte o problema de gravação dos dvd's o problema estará certamente no laser do teu leitor. Penso que o Pimpão já trocou uns quantos ;)
Confirmo...

Re: Problema de leitura no BMW High 2013 DVD DL

Enviado: 02 fev 2013, 11:50
por Mr_x
JPimpao01 Escreveu:
Kasmafan Escreveu:Boas, o entendido nesta matéria é o Pimpão, mas pondo de parte o problema de gravação dos dvd's o problema estará certamente no laser do teu leitor. Penso que o Pimpão já trocou uns quantos ;)
Confirmo...
Um dia se precisar de trocar, já sei com quem falar :)

Re: Problema de leitura no BMW High 2013 DVD DL

Enviado: 06 fev 2013, 19:47
por Aguero
Mr_x Escreveu:
Kasmafan Escreveu:Boas, o entendido nesta matéria é o Pimpão, mas pondo de parte o problema de gravação dos dvd's o problema estará certamente no laser do teu leitor. Penso que o Pimpão já trocou uns quantos ;)

Boas.
Acabei por optar por uma versão SL...
Ouvi dizer que pro ano, já deve sair a edição em dois DVD-SL e não um DVD-DL.
Para agora desenrasquei....

Companheiro, podes confirmar como "optaste" pela versão SL ? Eu penso que preciso fazer o mesmo no meu (Business), pois acontece-me o mesmo. "instalou" inicialmente, mas depois leva muito tempo para disponibilizar a procura de endereço, e acaba depois por aparecer que não é possivel ler o ficheiro...

Re: Problema de leitura no BMW High 2013 DVD DL

Enviado: 07 fev 2013, 14:00
por Mr_x
Aguero Escreveu:
Mr_x Escreveu:
Kasmafan Escreveu:Boas, o entendido nesta matéria é o Pimpão, mas pondo de parte o problema de gravação dos dvd's o problema estará certamente no laser do teu leitor. Penso que o Pimpão já trocou uns quantos ;)

Boas.
Acabei por optar por uma versão SL...
Ouvi dizer que pro ano, já deve sair a edição em dois DVD-SL e não um DVD-DL.
Para agora desenrasquei....

Companheiro, podes confirmar como "optaste" pela versão SL ? Eu penso que preciso fazer o mesmo no meu (Business), pois acontece-me o mesmo. "instalou" inicialmente, mas depois leva muito tempo para disponibilizar a procura de endereço, e acaba depois por aparecer que não é possivel ler o ficheiro...
Na versão High, alem da mesma originalmente ser em DVD-DL, existem versões ripadas em SL, onde são retirados alguns pontos de interesse ( no caso da minha, não tem os restaurantes), alem disso só tem a linguagem em Espanhol (tudo isto para caber dentro de um DVD-SL),
Na tua edição, gravas em DVD-DL ou DVD-SL??

Re: Problema de leitura no BMW High 2013 DVD DL

Enviado: 07 fev 2013, 20:41
por Aguero
DL...em SL não cabe!!! :/
Eu dispensava as outras linguas, ficando com o Frances, se isso fizesse caber num SL...mas não faço a minima como fazer isso...

Re: Problema de leitura no BMW High 2013 DVD DL

Enviado: 08 fev 2013, 09:52
por Mr_x
Aguero Escreveu:DL...em SL não cabe!!! :/
Eu dispensava as outras linguas, ficando com o Frances, se isso fizesse caber num SL...mas não faço a minima como fazer isso...

Boas.

Passa pelo GPS Underground, se não encontrares logo a versão SL, é só criar um tópico, que eles explicam logo como deves fazer isso.
Boa sorte... :fixe